Bosch 4100-09 10-Inch Worksite Table Saw with Gravity-Rise Stand has all the features a perfect table saw should have. The purpose of table saw is, that it must be easily adjustable and can be used anywhere in the job site, also it must be accurate and powerful to handle any type of material. The Bosch 4100-09 table saw is able to do all these with an ease. These make this table saw an amazing saw for all small work in the job site.
The main features of the Bosch 4100-09 worksite table saw with 10 inch blade are
- Smart guard system is the first ever quick and easy-to-use modular blade guard, anti-kickback pawls and riving knife system, provides superior control over the material and maximum visibility while cutting
- Square lock™ rip fence engineered for maximum trueness, the ” best-in-class” fence glides along the rail at a finger’ s touch or locks into place for solid and consistent cutting performance
- A large 29″ x 21.5″ machined aluminum tabletop easily handles wider stock for greater ripping capacity
- An integrated sub base increases tool life by handling jobsite abuse, while protecting the table saw’ s base
- The soft start and constant response™ circuitry enables a quiet/smoother start-up, reduced start-up torque and maintaining speed while under load
- Built-in sub-base and tabletop carry handles add to the saw’ s portability from jobsite to jobsite
- On-tool storage enables all saw attachments and tools, including Smart Guard System, Fence and Miter Gauge
- Exclusive arbor lock allows single wrench blade changes
- Patented design of the Gravity-Rise trade wheeled stand allows the easiest setup and take down of your table saw
- The heavy duty construction and 8″ pneumatic wheels allow the Gravity-Rise stand to handle the toughest job sites
Bosch is a world renowned company and their quality precedes them. Their table saw, Bosch 4100-09 is no exception. It is powerful, accurate and comes with gravity rise stand with two wheels which also makes it easily maneuverable.
Designed for heavy duty
Most table saw either too heavy to move or too light that is shakes while doing any sort of weighty work. The Bosch 4100-09 falls in between these two criteria which makes it more desirable to work with. It alone (the saw) weighs about 60 pounds and the gravity rise stand weighs approximately 39 pounds, so the combination is around 99 pounds. Though Bosch 4100-09 weighs a bit heavier than some of the portable table saw, due to the wheels attached with the stand it is not that much of a problem to carry it around the job site.
The Bosch 4100-09 requires very minimum and the usual tools to assemble. The guiding manual provided is easy and clear cut to understand the procedure of assembly. It takes no time to assemble this powerful cutting tool.
The Gravity rise stand
One of the unique feature of this table saw is its ability to contract itself along with the stand and can be put aside leaning at the wall. This not only makes it easy to move but makes it less space consuming which is expected from a work site table saw.
Smooth and clean cuts are the result of the powerful motor attached with it. The amperage of the motor is 15 amps that have 3650 rotation per minute in no load condition. This immense power is greatly combined with super easy control. The start-up operation is much safer which increases safety measures also ensure that machine parts and blade will last longer.
The Smooth Cutting Table
The table on the Bosch 4100-09 is smooth and accurate. The table is 29” wide and 29 ½” deep, and made from machined aluminum. This table can also extend and it offers a total ripping capacity of 25” wide. This large cutting capacity means that you will be able to make a lot of cuts that you normally might think that you’d need a larger shop saw for. And you can also purchase left side extensions (12” or 18”) to give you extra support on the left side for over-sized sheets of wood and other materials.
The adjustable rip fence is amazing to use. The important fact is the setup of the fence can be done single handed, this is really a nifty character of Bosch 4100-09. There is also a rip fence scale that shows you the distance between the rip fences and saw blade at a quick glance. This is a very useful feature that makes it a snap to adjust the rip fence accurately.
The Blade & bevel adjustment
The blade of Bosch 4100-09 moves smoothly when in operation. There isn’t any upward or downward movement.
The bevel adjustment is also directly on the front of the saw. Bevel can be adjusted just as easily as blade height and it has a lock too. There is also a blade bevel scale which shows the amount of degrees that the blade is tilted.
The safety measure of blade
The modular smart guard system of Bosch 4100-09 provides safety to the user. The barrier guard not only covers the blade but provide protection from accident. These entire features are attached with the table saw just to give an additional sense of security so that users can only concentrate on the work and nothing else.
Bosch 4100-09 10 inch worksite table saw can be used to cut dadoes. It can fit 8″ stack dado sets that are up to ¾” wide. The stack dado set needs to be bought separately. This is another unique feature this tool provides because most of the portable or smaller table saw are unable to do so.
The warranty plan will cover the first year, if anything is not working correctly with the saw. There is a one year limited warranty, a 30 day money back guarantee and a one year service plan. The one year limited warranty covers and defects or issues with workmanship.
The Bosch 4100-09 worksite table saw comes with
- The Smart Guard system (guard and anti-kickback pawls)
- A push stick
- The miter gauge
- The rip fence
- A carbide-tipped blade
- The Gravity Rise stand
- An instruction manual
One might thing this handy powerful table saw must be quite expensive. It isn’t. It will only cost $549. This is really hard to believe that such a machine with high caliber can be bought at such price.
Pros and Cons of Bosch 4100-09 10 inch Worksite Table Saw
First of all it is precise; every object can be cut or ripped with proper accuracy. The safety measure maintained through the blade guard is truly praiseworthy. Though powerful the motor is quiet one with soft-start. Finally the most eye catching feature is the gravity rise stand.
There is hardly any con of this amazing machine. If anything can be said, it is that it doesn’t have a blade locker. Warranty is only for a year.
Despite these small cons it is perfect for any job site. Also the features and versatility Bosch 4011-09 table saw provides is unparallel. The price is reasonable and if there is any problem on arrival, it is fixed as soon as possible. So for an efficient worksite this table saw is must.
Best Table Saw Reviews 2013 – Top 5 Table Saws
Read following best table saw reviews and select your best table saw:
No.2 : Bosch 4100 Table Saw Review